Here we have compiled instructions on how to make your own original rubber strap. Anyone can easily make their own rubber strap by following the instructions. If you use an existing illustration, please do not give it to others, but keep it for your personal enjoyment only because of copyright issues.
Source: kousakuukan.qlookblog.net
5. Pour it into the mold.
Drop the silicon in the mold.
It's easier to get rid of the air bubbles if you drop it thinly like a thread.
It would be better to drop it from as high a position as possible.
If you drop it from a high position, it won't go into the target area and stick out.
Source: kousakuukan.qlookblog.net
6. Do it until it becomes flat.
After some time
If you leave it for a while, it will flow flat.
Source: kousakuukan.qlookblog.net
7. Repeat each color.
I used a bamboo skewer to pour silicon into the small parts like the eyes.
You can do the small part first and do the big part later.
Pour the silicon in the order you like.
Source: kousakuukan.qlookblog.net
8. Pour in the base.
After curing, we pour colored silicon as a base.
It is not a complicated shape, so it is usually dropped with disposable chopsticks.
Source: kousakuukan.qlookblog.net
9. Remove it from the mold when the base hardens.
Silicon shrinks when it hardens, so it looks a little bit dented, but it's a little bit so I don't think it's enough to bother you.
Remove from the mold the mold, stick it on a rubber plate, and it's done.
Finished products by material
Made with acrylic resin
Source: kousakuukan.qlookblog.net
Make from an acrylic resin
After drying, it is soft and shiny.
If you press something like your nails, it will take shape. But it became less noticeable as time passed.
Made with Bond
Source: kousakuukan.qlookblog.net
Of Bond
Since it is a bond, I think it will come off normally without silicon spray if it is a plastic mold.
Bond becomes semi-transparent when it dries, so if you mix it with Bond after making the color with paints, the color tone won't fail easily.
Made with bond and starch glue
Source: kousakuukan.qlookblog.net
Made of glue and starch paste
I feel that it became a little harder and matte texture than the one made only with bond.
Made of paper clay
Source: kousakuukan.qlookblog.net
Make from a paper clay
It was quite troublesome to bury the clay.
Air came in and the surface became dirty.
It is difficult to bury so as not to let air in, but I feel like I can manage if I bury it with loose clay.
synthetic glue
Source: kousakuukan.qlookblog.net
Synthetic paste
The membrane of the synthetic part is very thin, and most of it is paper clay, so it has elasticity like a sponge.
But if I treat it too roughly, I feel like I'm going to die.
Sealing materials for construction
Source: kousakuukan.qlookblog.net
Sealants for building use
For coloring, I mixed oil-based ink used to replenish stamps sold at 100 yen stores.
I put it in a squeezer made with a straw and poured it into the mold.
It takes a bit of a knack to inject so that air doesn't get in. If you try it several times, you will be able to do well.
resin
Source: kousakuukan.qlookblog.net
Resin
I used a product called グミーキャスト.
There are hard type and soft type, but I used the soft type this time.
The cast was semi-transparent liquid, so the black part that was poured later became transparent.
If you make it with a light color, it seems better to mix white ink to make it opaque.
Source: kousakuukan.qlookblog.net
The prototype is made of desk mat, the mold is made of resin, and the real thing is made of silicon. It looks the best.
BONUS ーラバスト STYLE template REFERENCE LINK
How to make a Rabast-style icon.
ameblo.jp
"Rubber strap style? template" - pixiv
www.pixiv.net
Contents
- Draw
- Before you make the rubber strap
- Please enjoy the secondary works on an individual basis!
- Printing seal IT'S. IT'S.
- How to make
- If you care about durability and perfection
- Step-colored rubber
- way of making
- Silicone rubber
- How to make
- Make a rubber strap out of oven clay
- How to make
- Make by shaping
- How to make (prototype version)
- How to Make (Shaping Stitch)
- How to Make (Actual Production)
- Finished products by material
- Made with acrylic resin
- Made with Bond
- Made with bond and starch glue
- Made of paper clay
- synthetic glue
- Sealing materials for construction
- resin
- BONUS ーラバスト STYLE template REFERENCE LINK
- Summary
- Related Summary
