Great success at doujin events! How to make original stickers

Here, we have compiled a list of simple methods for making original stickers that can be used at coterie events. It also introduces how to use stamps and glass paints, as well as how to make stickers using a print shop or a commercially available sticker kit.

How to make a seal using a stamp

Just put your stamp on the sticker!

Simply stamp a seal on a sticker found at 100-yen stores or office supply stores.

It is also fun to create your own original stamp by carving a poppy seed.

How to make an original stamp

Draw (copy) the design on tracing paper
Copy the design onto the eraser.
Cut the eraser to a size that is easy to engrave. 4.
Carve the mark so that the surface is trapezoidal.
5. remove the shavings neatly with cloth tape

www.keshigomu-hanko.com

Make a seal with wood bond.

For simple designs!
With wood bond, you can create three-dimensional stickers that can be used repeatedly!

How to make a seal using wood bond

Source: josei-bigaku.jp

What to prepare

Clear file
Woodworker's bond
Color water-based pens

Source: josei-bigaku.jp

1. Foundation building

After selecting the character, pour the bond over it.
It is best to make it a little thicker and flatten it as much as possible, so that later work will be easier.

Source: josei-bigaku.jp

2. Air venting

To remove air from the bond,
To remove air from the bond, prick it with a needle or safety pin to remove the air, so that the finished product will be clean.

Source: josei-bigaku.jp

3. Dry overnight

Over time, the bond becomes transparent.
This proves that it is dry.

If you leave it approximately overnight, it will dry and you can proceed to the next step.

Source: josei-bigaku.jp

4. Draw the main line in black

The first step is to trim the edges.

Once the edging is done, it is safe to let it dry a little or check with a tissue to make sure the color does not stick.

Source: josei-bigaku.jp

5. Apply color

The inside color is painted from the outside to surround it, and then painted in stages.

Source: josei-bigaku.jp

6. Peel off and complete.

When peeling, peel off slowly from the edges.
Also, since it is a clear file, the file can be peeled off with a slight distortion.

Source: josei-bigaku.jp

Attention! Attention!

Bond seal hardens when cooled. If the seal is cold, it cannot be reapplied. On the other hand, if the seal is warmed, it softens and can be applied to another location.
If the seal is placed on a stove for about 10 seconds, it will soften.

We do not recommend placing the seal on a stove, as it may melt if placed on a hot surface.
Please be careful.

Making stickers with glass paints

Glass paints sold at 100 yen stores.
Originally intended to decorate glass (e.g., stained glass style), it can be used repeatedly as a seal, just like a bond seal.

Each color is required, so it may be a little difficult to get them all.

How to make glass paint stickers

What to prepare

Glass paints (each color)
Clear file

paint with edges

On top of the clear file, border it with black.
(It will act like a dike for each color.)

After the black is dry, paint each color.

When all are dry, you are done.

Make stickers with label paper

gundamania6
gundamania6
@gundamania6

Contents